|
Seeking wisdom of the list! I am nearing completion of my conversion and have encountered a small problem . My injection pump has a device attached to the right lower side where normally aspirated diesels have a plate fastened by 2 bolts. The device appears to possibly be a solenoid valve and has a single pole electrical connection and a small steel line running to the base of the pump near the fuel inlet. My question is what is this device and to what source should I connect the electrical circuit? Thanks, Harry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.