Date:         Sat, 2 Sep 2000 02:20:25 -0700
Reply-To:     Bill Davidson <wdavidson@THEGRID.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Davidson <wdavidson@THEGRID.NET>
Subject:      testing temp 2 sensor?
Content-Type: text/plain; charset="iso-8859-1"

On page 24.45 the Bentley shows a graph that plots ohms vs temperature...

I've been assuming that the left side of the graph is for the temp 1 sensor
and that the right side of the graph is for the temp 2 sensor....

But it does occur to me that at 50 deg C (the dividing line between left and
right sides of the graph) the sensor(s) could conceivably have a
discontinuous relationship between ohms and temperature, i.e.: both sides of
the graph would apply to both sensors??? So which is it?

Thanks,
Bill

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.