Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 2 Sep 2000 20:07:20 -0700
Reply-To:     Daniel Schmitz <djs@GENE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Daniel Schmitz <djs@GENE.COM>
Organization: Genentech, Inc.
Subject:      Made Roy O's AC modification...
Content-Type: text/plain; charset=us-ascii

Well, in a fit of unbridled, irresponsible ambition, I performed the AC duct modification suggested by Roy O. (whose metallic blue '87 Westfalia is identical to MY '87 Westfalia, but infinitely cleaner, I might add).

Frequent list readers will recall that Roy modified the AC duct in his camper so that cooling air from the evaporator exits the housing ducts in front at a higher velocity, thus enabling it to actually reach the cab. How he did this was to add baffling so that the air pressure is maintained rather than dissipated inside the AC duct. The factory design allows the air from the evaporator to fill the duct housing and lose its velocity in the process of exiting. This is great for back seat passengers, but since I generally carry no passengers, I felt that my own comfort was the priority here.

Since I didn't feel like going to Home Depot for materials, I simply rolled up some newspaper and wrapped it in duct tape. I made two of these, one for each side, and formed a narrow channel for the pressurized air to travel through. I also had to remove the plastic baffles in the AC ducting (I think they direct air to the full width of the duct housing, which defeats my purpose), which necessitated removal of the housing from the cabinet assembly.

While removed, I noticed that one side of my AC cabinet had come unbolted from the van's ceiling, so I bolted this back up, using locktite on the screw (heard that AC housings are prone to come loose like this).

One further mod: I took the little plastic baffles out of the three center vents so that they would not be an impediment to airflow. The remaining vents are now merely cosmetic with the new baffling.

The cold air definitely reaches the cab a lot more, but it's not warm enough to tell if it makes a difference yet. Tomorrow I will be driving into the Sierra foothills, and will report on the improved AC performance.

Dan


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.