Date:         Sun, 3 Sep 2000 12:33:39 EDT
Reply-To:     Wolfvan88@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Lilley <Wolfvan88@AOL.COM>
Subject:      Re: High Ratio Rockers
Content-Type: text/plain; charset="US-ASCII"

> Do you want the Pauter because its less expensive than the GeneBerg or does
>  it have some advantage?
>
Both.
There is a cost savings and I like the roller tips Vs the slider method.  I
will ask Pauter, but I think the Pauter might also be overall lighter due to
the aluminum alloy Vs the steel.  When you combine the roller tip with the
lightweight rocker, there is a weight savings that should keep you from
increasing the spring tension.

Robert

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.