It's your resistor Box. Don't know where it is located - may even be on the blower itself. Track the wires from the fan switch and see where they lead. Should be a plastic or metal box. Don't know how to get at it - will be interested to see your replies as I need to get there myself. David Del Ben 85 1.9-Vanagon -----Original Message----- From: John Rodgers [SMTP:inua@HIWAAY.NET] Sent: Monday, September 11, 2000 12:58 PM To: vanagon@GERRY.VANAGON.COM Subject: Single Speed on Front Heater Fan Switch My front heater fan switch will operate on the highest setting only. The settings between OFF and HIGH don't work. I have a new switch, but not sure the switch is the problem. Anyone have any ideas? I'm also open to suggestions as to how to get at the thing to replace it. TIA, John Rodgers 88GL Driver |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.