Get on a steep grade - 35% - backend up hill. With the pressure cap off the coolant tank, run it until it warms up and thermostat opens. Run a little longer, then fill the coolant expansion tank with proper coolant, put the pressure cap on, and you shouldn't have any more problems. John Rodgers 88GL Driver Dan Johnston wrote: > I've just replaced both sensors by the thermostat housing and about 3-4 > cups of antifreeze came out. do i need to bleed the whole system? > thanks, > dan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.