The manufacturer made several extra sets, front and rear, of syncro springs in filling the group purchase order. I bought the extras and thus have some available. They will raise ride height to about 19"-19.25", and are slightly stiffer than stock. they are made by a top manufacturer and are of very high quality. I also have extra front springs. These can be used with the stock rear springs since they are very close to stock in stiffness, and it is the front that are too soft, if you use a hard plastic spacer 1/2-3/4" thick to raise the ride height in the rear (the ratio is 1:1.6...meaning a spacer 1" thick will raise the rear 1.6"). p-mail me if interested. steve |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.