Date:         Mon, 11 Sep 2000 09:43:33 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: brake dust shields...replacing?
Comments: cc: linnes@uvic.ca
Content-Type: text/plain; charset="US-ASCII"

In a message dated 9/10/00 11:59:44 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

<< brake dust shields...replacing? >>
    Larry, the brake dust shields are replaceable.  I just did mine during a
complete brake overhaul a month ago.  They can be obtained from a VW dealer
only.  Get the six screws that hold them in place to the stub axel.  The old
ones will more than likely be toast by the time you bang them outa their
place.  Cost was $69.95 each plus $12.54 for the six screws.  PAINT THEM with
a good rust preventative paint before installing them !  Don't say I didn't
tell you afterwards !
    Glad you had a good trip.  I may have been able to save you some bucks
from your "tres cher" experience in Gatineau but too late for that now.  If
your ever passing this way again I'm not that far away.

Cheers

Frank Condelli
'87 Westy & Lionel Trains
<A HREF="http://www.vanagon.com/">Vanagon List</A>, <A
HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A
HREF="http://www.westfalia.qc.ca/CIW_English.asp">IWCCC</A> & Capital City VW
Club member
Vanagon/Vanagon Westfalia Service for the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless
Steel Mufflers</A>
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli &
Associates</A> or http://frankcondelli.com