Hi- Can anyone with a diesel tranny do me a favor and measure the length of the clutch operating lever (the little arm the the slave cylinder moves)? I am wondering if it is longer than the boxer operating arms (all boxers use the same clutch operating arm). The operating shafts are the same between the diesel and the boxer so I am wondering what the difference might be. The boxer lever appears to be 68mm from the edge of the hole to the tip with the ball riser sitting 6mm from the tip. TIA dave |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.