Date: Thu, 21 Sep 2000 13:50:30 -0400
Reply-To: "Cliff Westendorp (by way of Derek Drew <derekdrew@rcn.com>)"
<cwestendorp@CLASSIC.MSN.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "Cliff Westendorp (by way of Derek Drew <derekdrew@rcn.com>)"
<cwestendorp@CLASSIC.MSN.COM>
Subject: Euro-Drive: FIX 84 Volkswagen Vanagon, No-start/Poor-idle/Stall
Content-Type: text/plain; charset="us-ascii"; format=flowed
*******************************************************
Sponsoring members may rate this FIX post
or add/view comments directly from this link:
http://members.iatn.net/c/c.cgi?m=2447&t=euro_drive
*******************************************************
1984 Volkswagen Vanagon 1.9 L
Trans: Standard
Mileage: 87,000 mi
VIN: WV2B0256EH057436
Fuel: Digifant
Emissions: Federal
Symptoms: No Start, Poor Idle Quality, Hesitation, Stall
Occurs: Hot, On Decel, Intermittently
___________________________ FIX: ___________________________
I got several good replies on this one, almost all pointed
to the grounds. I had cleaned them,although voltage drop
showed nothing and he drove it over the weekend. He said it
was running great. Other commen things to check are the
idle and WOT switches on the throttle body, the air intake
boot and the idle stabilizer. Thanks to everyone for the
help.
____________________ ORIGINAL MESSAGE: _____________________
Hello, I need some advice on this rig. The customer stated
that two days ago after coming off the highway the Van
began surging and then stalled. It would not restart for
three hours. He drove it several miles and it repeated the
same, first surging then stalling and no restart. He drove
it in today and it sat for two hours and then it would not
start. After pushing it in and testing spark, ok at that
time, then fuel injector pulse the thing started. It ran
for over an hour but idled rough. I tested the temp sender
resistance-was ok. Then I tested the voltage based on the
Vantage it was way off. When I disconnected the temp sender
the pulse width went up from 3.08 to 3.4 and the idle
smoothed out. Based on the vantage voltage readings I
replaced the temp sender only to find it identical to the
old one. The vane air flow meter is reading 1.36 at
idle-Vantage spec to 1.15. I could not get it to not start.
Any ideas on what to check? Thanks for the help.
Cliff Westendorp
cwestendorp@classic.msn.com
Owner/Technician
JAMESTOWN GARAGE
Jamestown, Michigan, USA
iATN Business Sponsor
http://www.iatn.net/atn/jamestowngar.html
___________________ TEST AND REPAIR DATA ___________________
TESTING AND RESULTS
Fuel pressure - KOEO 40,KOER 33
RELATED REPAIR HISTORY
Customer said heads were replaced 11,000 miles ago.
Customer also replaced ECM.
_______________________________________________________
iATN Industry Sponsors: http://www.iatn.net/atn/
iATN WebSite: http://members.iatn.net/index.asp
Guidelines: http://www.iatn.net/guide.html
To configure or cancel your iATN account see:
http://members.iatn.net/config/index.asp