Transporter 1984 1.9l gasoline european specs. I have a strobe light where I can set the advance in degrees. 1. Is the notch on the belt pulley at TDC or at 5 degrees ahead of TDC 2. Same question for the mark on the flywheel. 3. I can't see the notch on the pulley and the mark on the flywheel at the same time (they'r 90 degrees apart) and I have to connect the strobe to the front left cylinder (when standing behind the vehicle, facing forward) in order to see the notch with the strobe. Is this cylinder 1? Should the notch and the mark coincide? Thanks in advance Tom Nordahl |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.