Well I got it to load... had to change my screen settings to maximum size even though that is not large enough for ECKT... then with the virtual desktop it works... I can get around on the screen... not easy but it works... NOW to learn my way around the program... Thanks for your help. Bill ----- Original Message ----- From: "The Bus Depot" <ron@NETCARRIER.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, September 25, 2000 10:42 AM Subject: Re: program for EKTA on small screens?
> > It seems to work properly, BUT I still can't get the ETKA program to load. > > So I'm wondering if there is a particular setting that I need to change on > > the Winspace Program? > > > Not that I recall. Etka loaded properly on my computer without Winspace, > but it was too large for the screen, so the buttons you had to click were > off the screen (making it impossible to use the software). Winspace allowed > me to pan the view until I found the buttons. A little inconvenient but > workable. > > - Ron Salmon > The Bus DepotŪ, Inc. > www.busdepot.com > (215) 234-VWVW > > _______________________________________________ > ORDER BY PART # TOLL FREE: 1-888-819-DEPOT > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.