Date:         Sat, 23 Sep 2000 11:41:27 -0600
Reply-To:     Larry Hamm <ldhamm@XMISSION.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Larry Hamm <ldhamm@XMISSION.COM>
Subject:      Re: gold plated trans mounts ????
Comments: To: SBWC919@AOL.COM
Content-Type: text/plain; charset=us-ascii

Brian Jones wrote:

> so i was under the bus and i noticed that my trans mount was looking a little
> sloppy. figured now would be a good time  to replace it-

Brian,
Someone posted recently about using a rabbit right side engine mount. I believe
he had to cut the original bracket and weld up the Vanagon bits, but if I recall
properly, he had less than $20 in it with the new mount. Check the archives.
Larry

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.