Date:         Mon, 25 Sep 2000 12:25:38 -0700
Reply-To:     Bill Davidson <wdavidson@THEGRID.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Davidson <wdavidson@THEGRID.NET>
Subject:      Re: program for EKTA on small screens?
Comments: To: The Bus Depot <ron@NETCARRIER.COM>
Content-Type: text/plain; charset="iso-8859-1"

Well I got it to load... had to change my screen settings to maximum size
even though that is not large enough for ECKT... then with the virtual
desktop it works... I can get around on the screen... not easy but it
works... NOW to learn my way around the program...

Thanks for your help.
Bill

----- Original Message -----
From: "The Bus Depot" <ron@NETCARRIER.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, September 25, 2000 10:42 AM
Subject: Re: program for EKTA on small screens?


> > It seems to work properly, BUT I still can't get the ETKA program to
load.
> > So I'm wondering if there is a particular setting that I need to change
on
> > the Winspace Program?
>
>
> Not that I recall.  Etka loaded properly on my computer without Winspace,
> but it was too large for the screen, so the buttons you had to click were
> off the screen (making it impossible to use the software).  Winspace
allowed
> me to pan the view until I found the buttons.  A little inconvenient but
> workable.
>
> - Ron Salmon
>   The Bus DepotŪ, Inc.
>   www.busdepot.com
>   (215) 234-VWVW
>
>    _______________________________________________
>      ORDER BY PART # TOLL FREE:  1-888-819-DEPOT
>