Date:         Mon, 25 Sep 2000 18:49:09 -0700
Reply-To:     Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@GERRY.VANAGON.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
Comments:     RFC822 error: <E> Mail origin cannot be determined.
Comments:     RFC822 error: <E> Original tag data was -> daveb
From:         Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@GERRY.VANAGON.COM>
Subject:      new vw factory repair manuals on cd
Content-Type: text/plain; charset=us-ascii

Hi-
        I was asking about some software which acts like a
VAG1552 and ending up getting this little tidbit of info.
http://www.baumtools.com/

dave

-------- Original Message --------
Subject: Re: VDS-Pro Information
Date: Mon, 25 Sep 2000 07:22:29 -0600
From: Bill Baum <bill@baumtools.com>
To: "Dave Bayer" <daveb@cp.net>

Dear Dave,

No, The software does not come with any programming info as the quantity
of
that information and the choices for programming are way beyond what we
can
produce. HOWEVER, we do sell the VW/Audi factory CD ROM's which are a
steal
at $99.00 each. VW/Audi has released each Official Factory Manual,
exactly
as the dealership receives it, on CD so all we need is model you are
working on, Jetta, Golf, etc, and we can get you the proper CD with the
engine coding information.

All the best,
Bill

At 11:12 PM 9/24/00 -0700, you wrote:
>Hello-
>         I am very interested in purchasing this software as
>I am currently in the middle of a VW engine conversion and
>will need a VAG1552 equivalent scanner to reset the ECU
>for the components I am using. Does this software come with
>info on programming a 98 vw 1.9 TDI (engine code AHU)?
>Thanks in advance.
>
>dave