Date:         Fri, 22 Sep 2000 15:36:47 -0700
Reply-To:     T Berk <tberk@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         T Berk <tberk@MINDSPRING.COM>
Subject:      Re: Decided to Rebuild my 2.1-Machining, grinding, welding
Comments: To: BenTbtstr8@AOL.COM
Content-Type: text/plain; charset=us-ascii

Benjamin Tan wrote:
>
> In a message dated 9/22/00 8:57:18 AM Pacific Daylight Time,
> NigelB@FOSCHINI.CO.ZA writes:
>
> << For some strange reason there is a chronic shortage of oversize main
>  bearings in South Africa for the 2.1 crank. >>
>
> I've heard this same complaint from VW shops here is the San Francisco area.
> I tried to get them from one of the list vendors but got no response.
>
> BenT


Try the Potterman:

<http://www.parts4vws.com>

hth,
TBerk

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.