Filcoff, David M. wrote: > > I recently replaced a fuel injector on my 2.1l digifant motor. The original > has a yellow plastic body, the replacement has a green plastic body. The > archive mention this problem, but no answer was given as to the difference > between the two, if any. The engine runs very well with the new injector. > The original had a very small crack running from the valve hole out, the > injector did not have a good spray pattern, cleaning had little result. Any > info would be appreciated. > > Dave > 87 Vanagon GL Wolfsburg > 61 Mango Standard Hi David, The color can be yellow or green. What matters is that the Bosch numbers on the top of the injectors match. The number is very small so you may need a magnifying glass. Also the ohmic value of any Digifant injector should be ~15 to 17 ohms. Regards, John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.