Bought a new fuel tank from RMMW, and had to do a lot of adapting to make it work. Have one small problem, though. The tank was designed for a later model van than mine, so the fuel nipple on the bottom of the tank that goes to the fuel pump is much larger. I thought no problem I will go get the white square filter and run 1/2 " fuel line from the tank to the filter and switch back to smaller after the filter. Wrong. Bought the square filter, and the flow on it shows small line from the tank, large to pump. What is the stock set up for this tank? Is there a reducing hose, or what? Any info would help. Adam Puzerewski 81 westy 74 beetle 86 cabrio Vanagon Partsmobiles |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.