Use the best!! Aeroquip #8 stainless steel braided teflon hose with the ends swedge-mated on so they don't leak. spin on adapters are usually available in sizes at most larger speed shops. I've got a couple, but not tried to fit to the WBX mount yet. One of them did fit my old type IV, though. DM&FS -----Original Message----- From: Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM> To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM> Date: Tuesday, October 03, 2000 12:26 PM Subject: Remote Oil Filter/Oil Cooler Hose
>What kind of hose is suggested for installing a remote oil filter and/or an >external oil cooler on a 1.9l wbx? What is the best material and what is >the minimum recommended ID? I would like to move the oil filter away from >the motor first, and then possibly add a cooler on the return line. Anyone >have a suggestion for an adapter to spin on to the existing filter >location? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.