>Is it easy to tighten a rear view mirror to keep it from folding in on the >highway? Yes. >Will it be >evident what must be tightened when I remove it? Yes again. Remove the mirror from the van (two phillips head screws) and tighten the nut at the base of the mirror (its the only nut on the mirror). Don't tighten the nut too much or the screw will pull out of the mirror. If it comes apart or loosens up again quickly, Bus Depot has new mirrors for around $20. I replaced the mirror and had to tighten the replacement, but it seems to hold ok now. Bill |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.