Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 9 Oct 2000 18:15:10 -0400
Reply-To:     Donald Baxter <onanov@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Donald Baxter <onanov@MINDSPRING.COM>
Subject:      Re: Shifter Part Needed
Comments: To: VeeDubVan@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

I did pretty much the same thing to my '85 Vanagon last winter. For $60 (Camelback VW) I got a kit that includes ALL of the shifter parts for the linkage at the floor and I replaced the whole thing. Shifts like new again and it was actually a pretty easy job.

___________________________________________________

Donald Baxter TransCore onanov@mindspring.com (home) 404 325 1991 donald.baxter@transcore.com (work) 770 246 6261 (Iowa City) 319 337 0494

www.mindspring.com/~onanov

Poetry is good for the corn.

----- Original Message ----- From: "- Lauren Pelzer" <VeeDubVan@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, October 09, 2000 2:47 PM Subject: Shifter Part Needed

> I put my van in a shop this morning to get a starter installed. In the > process of driving the van the 8 feet from the parking space to the bay, the > mechanic broke something in my shifter. He said when he pushed it down to > put it in reverse "it stuck down". So now, I have to pull the shifter up to > put it in gear, and it is very loose. Also, it's hard to tell if I have it > in first or reverse...it's got to be a hazard to drive this way. > > Anyway, the manager said it was a little plastic part that broke. He said > that it didn't look like a "fresh" break - nevertheless, he called "all over > the place" looking for this little plastic part but couldn't find it. He > said, in the cockiest tone he could muster "If you can get the part, I'll put > it in for you...". I told him (with equal attitude) to give me that in > writing, because "I WILL get the part"....so, I'm really hoping someone out > there knows what I'm talking about and has one of these plastic doo dads > laying around that they'd be willing to sell...!? > > Thanks in advance for your assistance!! > -Lauren > > > > > > ___________ > ||E[__] [__]|[_]\\ > | =======| - || > * * * =( o )--------( o )=p > '85


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.