Date:         Wed, 11 Oct 2000 06:56:56 -0500
Reply-To:     Darrell Boehler <midwesty@MIDWEST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Darrell Boehler <midwesty@MIDWEST.NET>
Subject:      Re: Are all Digijet ECU's the same?
Comments: To: Mark Ingalls <ingalls_mark@HOTMAIL.COM>
Content-Type: text/plain; charset="iso-8859-1"

Hi Mark,
    Yes there are 2 styles that I have run across and they are functionally
the same.  Most are made by bosch and have a metal cover. Some late 85s have
ecus  made by triumph adler and have a plastic case.
    Be sure to secure either ecu in the holder and the holder to the vans
frame. If the ecu ground near the coil has problems the ecu will use the
frame for a ground path.  If you have an early  ecu mounting frame you may
need to drill some mounting holes in it for the triumph adler ecu. The late
85 holders will accept either style ecu.
Midwesty

----- Original Message -----
From: "Mark Ingalls" <ingalls_mark@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, October 10, 2000 10:58 PM
Subject: Are all Digijet ECU's the same?


> Hello,
>
> I am planning on buying a used ECU from a 83.5 that a list member
> advertised. I plan on using it to make a Digitool to use in a 85 GL.
>
> Are all the Digijet ECU's the same? I noticed they only sell one style
> replacement new.
>
> Thanks in Advance,
>
> Mark Ingalls
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>