Date:         Mon, 23 Oct 2000 15:47:10 -0700
Reply-To:     Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@GERRY.VANAGON.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
Comments:     RFC822 error: <W> Incorrect or incomplete address field found and
              ignored.
Comments:     RFC822 error: <E> Mail origin cannot be determined.
Comments:     RFC822 error: <E> Original tag data was -> mwsnow
From:         Undetermined origin c/o LISTSERV administrator
              <owner-LISTSERV@GERRY.VANAGON.COM>
Subject:      Re: Heat!!!
Content-Type: text/plain; charset=us-ascii

In my 1983 ASI, the HydroFlame heater is mounted in the bottom cabinet
just behind the driver's (left side) seat.  The ASI uses a larger
(RM215) refrigerator than the Westy, and the cabinets are deeper.  There
may not be enough adjustment in the stated 21" depth for proper
clearance in a Westy cabinet.  I wish I had a manual for the heater!  On
the outside of the van, there is an exhaust vent at about knee level.
The vent is also made by HydroFlame.  Living here in Southern
California, I don't imagine that I will use it much.  It takes up too
much storage volume for my liking.  I would greatly prefer to have an
external model that runs on diesel fuel.  YMMV ;-)

Mike Snow

Mike Finkbiner wrote:
>
> Jim -
>
> Sounds like you got a real deal on the furnace.  Where would you mount
> something like that in a Vanagon Westy?
>