there is an article at www.vanagon.com ... under oil pressure problems I think that mentions the socket size Bill ----- Original Message ----- From: "Chuck Mathis" <CMathis227@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, October 29, 2000 2:47 PM Subject: Oil Pressure Sender Questions
> Finally got around to trying to pull out the oil pressure sender on my '85 > 1.9l. Damn, they got that puppy in a real tight spot. What size socket do I > need to get it out? The largest in my standard set is a 19mm (too small) -- > though I do have a 27mm floating around in the tool box, why I don't know. > I'd rather not buy several odd sized sockets (like the 27) that I can't use > for anything else. > > My new exhaust system should be back from Polymer Dynamics next week. Once > that's in I'm sure I'll find something else to mess with. > > Chuck > '85 Wolfsburg Westy -- 'Roland' > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.