Have your tire shop read 44.2 to 44.4 of Bentley... For rear camber, loosen outer bolt on trailing arm; adjust camber by moving trailing arm up or down with screwdriver; tighten bolt to 76 lb-ft/105 Nm. david At 22:11 11/1/2000, Todd Last wrote: >I have H&R springs on my 1988 Westy and the rear camber is now out of >range by about a degree. (reading of 2.4 degrees) > >Is this adjustable? My tire shop says no. > >Thanks > >Todd >'88 Westy David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.