"Joel Walker" <jwalker17@earthlink.net> wrote: > just pull the spark plug wires OFF, one by one ... the non-firing plug > (if that's really what it is) will make no difference in the engine > running. or very little difference. pull off one that IS firing, and > you'll notice the difference right away. when you pull one off and it > does NOT make any difference, that's your culprit. Tried it, didn't make much difference, but then I removed them while the motor was OFF, so it was harder to tell. Somehow I feel uneasy to touch the cables when the motor is running, since a crack in the insulation will give me a huge ZAP!
Cheers, T-man
____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.