Date:         Fri, 3 Nov 2000 20:24:52 -0800
Reply-To:     Jim Arnott <jrasite@EONI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Arnott <jrasite@EONI.COM>
Organization: WetWesties <http://wetwesties.org>
Subject:      Re: 2nd stock propane tank
Comments: To: Bill Davidson <wdavidson@THEGRID.NET>
Content-Type: text/plain; charset=us-ascii

I don't see why not...  The stock regulator s/b set up for 11" of
water pressure. That seems to be typical.  (Al least for both my
Hydro-flame furnace and my Charbroil BBQ.)  Don't know what the
disposable cylinders are at, but I would assume something close seeing
as Coleman sells all those accessories to run their propane powered
appliances off the large cylinders.

Jim Arnott
WetWesties
Union, OR

Bill Davidson wrote:
>
> So I'll ask my question again (it was buried in a post this morning):
>
> Can a stock propane tank be made to work in place of the 20 lb propane tank
> that is mentioned in the Buddy heater set up?
>
> Thanks,
> Bill