Can anybody give me a couple of measurements, if you have a Vanagon caliper on hand? I need to know how far apart the mounting holes are on the Girling calipers used on the later Vanagons and Syncros. I also need to know the measurement between the holes where the caliper mounts to the caliper carriers. Please measure center to center. I have some Girling calipers from another make of vehicle which has a substantially larger piston. I was hoping to bolt these directly onto my Vanagon. Or perhaps it possible, mount it on the Vanagon caliper carriers. I don't have a Vanagon caliper on hand otherwise I would measure it myself. Please measure from the centerline of one hole to centerline of the corresponding hole. Thanks, BenT San Francisco |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.