Thanks Steve! can you remember the name of the plastic material that you used? Bill ----- Original Message ----- From: "Steve Schwenk" <steve@SYNCRO.ORG> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, November 13, 2000 8:29 AM Subject: Spring Shims for Westy List
> I should have gotten this info out weeks ago, but i > have had not had a chance to even look at my e-mail, > let alone write any, it's been so busy. (I owe e-mail > responses to a bunch of people...sorry!) > > The rear spring shim is roughly 6" in diameter with a 1 > 3/4" hole in the middle. I used on 3/16" thick to > level. 1/4" should be fine. > > The front spring shim is roughly 5 1/4" - 5 3/8" in > diameter. It has a large 3 1/2" hole in the > middle...so it is like a big washer that is about 3/4" > wide. I used a spacer 1/8" thick to level the van. > > Use at your own risk! > Steve > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.