Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2000, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 19 Nov 2000 09:25:58 -0600
Reply-To:     John Rodgers <inua@HIWAAY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@HIWAAY.NET>
Subject:      Re: How to bleed the cooling system???
Comments: To: Karl Wolz <wolzphoto@worldnet.att.net>
Content-Type: text/plain; charset=iso-8859-1

Jacking up the rear seems to work. I don't have gurgling or overheating or heater problems so far as hot coolant goes. Now blower motors....that's another story.

John Rodgers 88 GL Driver

Karl Wolz wrote:

> Yeah, but it DOES get the air out of the radiator. > > Karl Wolz > > ----- Original Message ----- > From: "John Rodgers" <inua@HIWAAY.NET> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Saturday, November 18, 2000 8:35 PM > Subject: Re: How to bleed the cooling system??? > > > My mechanic jacks up the REAR of my van to do the bleeding of air from the > > system. You can do the same by parking on a really steep grade, opening > the cap > > on the > > coolant expansion tank and letting it run a while. This is the easiest > way. That > > jacking up the front and bleeding is a PITA. > > > > Good luck. > > > > John Rodgers > > 88 GL Driver. BTDT > > > > Sylvain B wrote: > > > > > OOPS!!! > > > Hi all again... :) > > > I own 1 1982 1.6l TD Westy. > > > After repairing a leak in my cooling system, i still have bubles in the > > > system. > > > I hear the swishing sound of those bubles behind the dashboard when i > use > > > the heather. > > > I tried to do like i saw a mechanic once: > > > I raise the front end of the van abou 18 inches, I open the cap of the > > > filling tank on the engine, tet run the engine at about 2000 rpm to get > the > > > engine warm. > > > When the coolant gets hot and circulates, i alternatively open and close > the > > > bleether valve on the radiator to let air out. If the level of the > coolant > > > goes down, i add coolant. before shutting down the engine, i put back > the > > > coolant cap. > > > I did this procedure twice but ther is always bubbles haunting my > system... > > > Any suggestions? > > > > > > Sylvain Bélanger > > > Montreal, Quebec > > > 1982 1.6l TD westy With no name... > > > > > > > _________________________________________________________________________ > > > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com. > > > > > > Share information about yourself, create your own public profile at > > > http://profiles.msn.com. > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.