Rico Sapolich wrote: > If you want to keep at it tonight and IF you know something about 120V. > circuits, try a small lamp (aka, lightbulb) in series with your soldering > iron. A 30 watt lamp, if there is such a thing, should just about give you > 15 watts on the iron. Also, 25 or 40 watt lamps should get you in the > ballpark. This is a great suggestion. The light bulb acts like a current limiter. It is variable resistance device (the higher the current, the greater the resistance) and a fuse (if the current gets too high the light bulb burns out). -Larry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.