while I was under the front of the van installing my "new" horns and having a general look around, I noticed when I moved the steering linkage(s) to see if there was any slop in any of the various connections, my entire rack would move, maybe 2mm or so, from side to side as I turned the "input" shaft. The rack bolts onto the frame via 4 bolts and rubber bushings. Looks like my bushings need replacement. Bentley shows the bushings being pressed out of the rack (rack on bench). Just another thing to worry about. Alistair |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.