Ben...Sure it can be done...as long as you got all the syncro parts including the case...it would be the same as a real syncro with the driveline removed......just remember that you need ALL the syncro guts along with the entire case..The only thing between the two that are the same are the gear sets themselves...pinion & mainshafts & cases are different, so beware...Good Luck Daryl of AA Transaxle Duvall, WA.(Seattle area) (425) 788-4070 1-877-377-0773 toll free http://www.aatransaxle.com (web site) > > I have a chance to buy the part of the Syncro transmission w/ the > differential lock for $100. I was told that you can install your > 2-wheel > drive transmission in there, then add a few vacuum lines and a > switch. The > net result being a 2wd w/ a diff. lock. > > Any thoughts? > > BenT > San Francisco |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.