Just installed 050 dizzy from bus depot. Switched out the points to a used set of pertronix that I had in an 009. (this was the dizzy that came with my 2 liter). The little ring and magnets came apart. I put it back together carefully, but get no fire on the #1 wire. ( kinda hard to use a timing light without it) . What could be wrong? It was running on 3 cylinders. I put the points and condenser back, and no fire at all (used the grounded plug method to check. What is up?????
TIA Adam Puzerewski 81 westy 74 beetle 86 cabrio Vanagon Partsmobiles
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.