> Chad wrote: > > the key to start my van will not turn in the ignition switch, its > never done this before....what do I do???? > Chad
Try to 'wiggle' it around as you turn GENTLY. Brute force will only serve to bend your key. You can also spray some WD-40 or other light oil in there, Don't use Graphite because unlike door locks, this one carries electricity and graphite can conduct. You might let the spray soak awhile and then with the key inserted, lightly tap on the side of the housing. This might free up something sticking. Oh, and is your steering wheel turned all the way to one side or in a way so as to put tension on the steering column lookout? you might try to turn the wheel back to a slightly free position as you work the key in it's lock. hth, TBerk |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.