Date:         Tue, 12 Dec 2000 00:24:08 -0800
Reply-To:     Todd Last <Rubatoguy@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <Rubatoguy@MINDSPRING.COM>
Subject:      Re: Which alternator V-belt?
Comments: To: Don Preston <donpre@MICROSOFT.COM>
Content-Type: text/plain; charset=us-ascii

In ETKA is shows as PN 095 903 137   9.5x1100mm

When I got one from the dealer it was the same PN as you have. I did notice
that one of the belts that is on my van currently (non-stock) was not as wide
as the stock belt and not cogged. So they may look different depending on
manufacturer.  (The 9.5x1100mm is the width and length of the belt - so it
should be easy to check the one on the van and see if it is the same as the one
the dealer gave you.

regards,

Todd
'88 Westy

Don Preston wrote:

> reposting with a descriptive Subject line....
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
> Of Don Preston
> Sent: Monday, December 11, 2000 6:38 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject:
>
> Hi all,
>
> I picked up a new alternator v-belt from my local VW deal the other day and
> went to install it. I noticed that the new belt doesn't match the old belt
> correclty. Problem is, I can't read the part number on the old belt.
>
> The new one is 9.5 X 1100, PN: COO 025 903 137 G.
>
> I this correct for my '87 Wolfy?
>
> Thanks,
>
> Don Preston
> '87 Wolfy GL
> ~Betsy the Mp3 Bus~