Getting brake work done here in the states is expensive (i.e., overpriced) because we are such a litiguous society. Many shops will replace everything they touch in an attempt to avoid any liability for a catastrophic failure of some related part they didn't replace. Hence, new bearings are used when there was probably nothing wrong with the old ones, same with new rotors too. This minimizes exposure to liability and pads the profits nicely. Most folks will do what someone tells them when their safety is involved, and the unscrupulous shops know this and feed on it. It is particularly bad with "undercar" shops, since people can't really check out what the shop is telling them and don't want to bother with a second opinion. David Marshall wrote: > > Ouch! > > I sell cross drilled Vanagon rotors (better cooling) and semi-metallic break > pads for $189 for the set! Midas has the golden touch... they think all the > stuff they have is made of gold with the sounds of things... at least you'll > never have to buy brakes again... at least that is what the commercials say! > > I very sorry to hear about stuff like this... here's a question though... > did they actually replace all the stuff they said? > > David Marshall > > Fast Forward Autobahn Sport Tuning > 4356 Quesnel Hixon Road > Quesnel BC Canada V2J 6Z3 > mailto:info@fastforward.ca http://www.fastforward.ca > Phone: (250) 992 7775 FAX: (250) 992 1160 > > . Vanagon Accessories and Engine Conversions > . Transporter, Unimog and Iltis Sales > . European Lighting for most Audi and Volkswagen models > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf > Of Robie Pierce > Sent: December 17, 2000 7:25 AM > To: vanagon@GERRY.VANAGON.COM > Subject: $$$Brake Job$$ > > My 91 vanagon failed state inspection due to front brake pads. Midas > gave me aa price $480 for pads and turn the rotors. Went to my Vanagon > shop. Original quote 240 new pads & turn the rotors. Then the call " you > need calipers, new rotors, pads, new bearings" price $1000 ! Gulp,... > well I got the Van back and my credit card is smokin at $1033. Rotors > $118 ea., Calipers, $129 ea., bearings & seals $100. Labor $319. I know > calipers, same VW part # from Bus Depot are $79 ea. 60% mark up !! > Some out there will say do it yourself, and wish I could, but disabled > in a WC. I have no real recourse, but put this into stats for a "high > end" brake job! > > Looking for night work ! ! -- Stuart MacMillan Seattle '84 Vanagon Westfalia w/2.1 '65 MGB (Daily driver since 1969) '74 MGB GT (Restoring sloooowly) Assisting on Restoration (and spending OPM): '72 MGB GT (Daughter's) '64 MGB (Son's) Stripped and gone but their parts live on: '68 MGB, '73 MGB, '67 MGB GT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.