Date:         Thu, 21 Dec 2000 17:51:16 -0700
Reply-To:     John Klun <jklun@GJ.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Klun <jklun@GJ.NET>
Subject:      <HOW TO>: blower fan replace
Comments: To: smitht@unb.ca
Content-Type: text/plain; charset=us-ascii

This is a post of yours from October 5, 1996.  I don't have a Bentley or
Haynes or any other manual I can use to refer to for re-oiling my blower
fan.  Do I need to completely remove my dash to get at it or can I just
(as I saw a message from the archives?) remove the top grille (the ones
that hold the headlights) and try to reach into the 3/8 or 7/16 hole
with a looong oiling hose?

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.