Date:         Mon, 18 Dec 2000 23:30:30 -0800
Reply-To:     Todd Last <Rubatoguy@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <Rubatoguy@MINDSPRING.COM>
Subject:      Power window track/cable repair
Content-Type: text/plain; charset=us-ascii

I had one of the guides pop off the track of the power windows -
disabling the window.
I removed the track and motor assembly, bolted the guide to the track
(Seems that they
use small plastic tabs similar to those holding the lower radiator grill
from the factory)

Unfortunately, the slack cable wrapped itself between the spool and gear
in the motor assembly.
Does anyone know how these are supposed to be set up (cable over the
spool)? Or am I stuck looking for a used
assembly?


Todd

'88 Westy
(With a 2x4 propping the window up)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.