Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2000, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Thu, 28 Dec 2000 17:49:41 -0800
Reply-To:   Dana Morphew <kadm@PUGETSOUND.NET>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Dana Morphew <kadm@PUGETSOUND.NET>
Organization:   Dana's Mobile Carpet Steam
Subject:   Re: Timing Belt, Tools and etc.
Content-Type:   text/plain; charset=us-ascii

I've heard that the cam can be damaged by using a cam locking tool to hold the cam while tightening or loosening the cam nut. Be forewarned!

-Dana-

> steel 3/16" X 6" long as a camshaft timing tool. 3/16 inch thick is a > really close just file the edge a bit for a perfect and smooth fit. It > also works great for keeping the cam from turning when tightening or > loosening the cam sprocket bolt.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.