Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2000, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 26 Dec 2000 11:54:20 -0800
Reply-To:     Jeff and Deb <jeffndeb@GCI.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff and Deb <jeffndeb@GCI.NET>
Subject:      Re: no clutch pedal resistance & no clutch engaging
Comments: To: Tarheel <puzerewski@email.msn.com>
Content-Type: text/plain; charset="iso-8859-1"

Thanks for the reply, Yes, it worked perfectly when I parked it. I looked at the Bentley manual, and see 1 bleeder valve located on the Slave cylinder. I have to admit that I have not bled the clutch hydraulics before. Can I access the valve through the engine compartment? I see that there are some warnings about improper types of hydraulic fluid, and a recommendation for replacing the fluid every 2 years. I am not aware of any servicing of the fluid previous to my purchase 4 years ago. How do I verify that this is the correct fluid, or simply replace it?

Appreciate the tips,

Jeff Hartman Juneau, AK 86 Vanagon ----- Original Message ----- From: Tarheel <puzerewski@email.msn.com> To: Jeff and Deb <jeffndeb@GCI.NET> Sent: Tuesday, December 26, 2000 12:04 PM Subject: Re: [VANAGON] no clutch pedal resistance & no clutch engaging

> It has to be hydraulic. Try to bleed it, and check fluid level, especially > if it worked fine when you parked it. > > > Adam Puzerewski > 81 westy > 74 beetle > 86 cabrio > Vanagon Partsmobiles > ----- Original Message ----- > From: "Jeff and Deb" <jeffndeb@GCI.NET> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, December 26, 2000 2:08 PM > Subject: [VANAGON] no clutch pedal resistance & no clutch engaging > > > > Hi, after a month of sitting idle in Juneau winter temps, the clutch has > > suddenly ceased to engage when I press the pedal of my 86 Vanagon. There > is > > no resistence on the pedal at all other than the return spring. I have > not > > detected any previous clutch problems and the brake hydraulics seem to be > > fine. Haven't tried the archives yet, but thought someone from the list > > could guide me in the right direction. > > Thanks, Jeff > > Juneau, AK > > 86 Vanagon > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.