Hi Andrew, > Can you tell me if the 108mm VW CVs are the same as > 930? If so, maybe I could get some direct from RSA. The CVs used on the VW 16" and the Audi only fit on the 16" axles, not on the normal 14"syncro or 2WD axles. They are of no use with "normal" vanagon parts. I have the 108mm Audi 100 /US-Audi 5000 CVs here. Will you use Vanagon or Porsche axles? The vanagon axles are too thin for the Audi 108mm CVs except the axles from the 16" syncro. If youŽll use the Porsche axles, please count the teeth and tell me the diameter, I can compare these values with the Audi CVs. Also, I could try to find out if 108mm Audi CVs exist that fit onto the thinner Vanagon axles... Greetings Raimund |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.