Today was one of those work on the van days, doing those jobs that I have been putting off and after all the work I am no closer to the solution so I would like to ask if any can shed some light on my problem. I have an oil leak I and I cannot locate the source. -it appears to be in the forward (toward driver) area of the engine -Its on the left side (driver side) -I removed the push rod tube cover plate, none of the tubes are leaking -Wife over filled the oil sump by about half qt (above the high mark) its back to normal -16,000 on this engine -the bell housing appears clear of oil -its not coming from the oil cooler -no coolant in the oil -the leak has also lightly sprayed the hatch cover on the left side -valve cover not the source -oil pressure sensor is not the source
It looks like the head may be leaking but then shouldn't I see a coolant some where in the equation? Thanks in advance. Jere 90 GL 88 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.