Date:         Mon, 1 Jan 2001 18:42:50 -0500
Reply-To:     Carolyn Kitzmann <kitzmann@EXIS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Carolyn Kitzmann <kitzmann@EXIS.NET>
Subject:      Inline 4 transplant question
Content-Type: text/plain; charset="us-ascii"

I mated the engine from the 87 Golf GT to the newly re-bellhoused vanagon
transmission today and noticed somthing funny.  The engine, which turned
relatively easily by hand when seperate, now was considerably harder to
turn.  It does turn, if you put a rench on the bolt at the end of the
crankshaft, but it requires atleast twice the force as before.  So my
question to the list members who have done similiar conversions, is this
normal or is something wrong.  My first thought was maybe the input shaft
from the diesel trans was maybe bottoming out in the crank.

Second question.  In the mess of the conversion I can't locate the bolts
that went through the engine mounts.  A 10 mm bolt slides in easily and has
some wiggle room, but a 12mm doesn't go in at all and looks to be only
slightly larger then the hole.  If someone could look and see if the bolts
are 10mm or something else would be appreciated.

Thanks,
Dave

82 Vanagon Diesel, soon to be Golf powered