Paul Gilland wrote: > I went out and bought a 17 mm allen wrench, and although it is the > proper diameter, the wrench is too physically large to fit t he drain > plug because the (stock) 'exhaust pipes are too close. Paul, I took my dremel tool and cut a 3/4 inch long piece of the end of the allen wrench. This stub piece worked perfectly with a 17 mm box end wrench. -Larry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.