Jeff and Tamara Nelson wrote: > 17 mm. It's a good idea to remove the filler plug before the drain plug > in case you run into trouble... > > JN > > Chad wrote: > > > > What size allen wrench is required to remove the filler plug on a 4sp manual > > tranny for an '85 GL? > > thanks I took a bolt with a 17 mm head and welded it into an expendable half-inch drive socket using high strength welding rod. You might be able to put a 17 mm nut part way into the plug and turn it with a socket. Larry 91 GL Chicago |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.