|
The POR-15 folks have a seam sealer you might want to check out. I have never tried either the seam sealer or any f the rust treatments but a "rust thread" that was up here a while back had some folks praising POR-15 to the skies. I have never seen it in any FLAPS but they do have a web site.
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of JordanVw@AOL.COM Sent: Tuesday, January 09, 2001 10:20 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: 3M seam sealer
In a message dated 1/9/01 12:38:01 PM Eastern Standard Time, swellmaster@HOTMAIL.COM writes:
Well i dremeled out old seams and filled them in with "3M Fast and Firm" When I did it, it was sunny for 3 hrs. then cold- front came and rained so i covered it with a tarp. Its been drying like 30 hrs. now and is still somewhat soft/ plyable. It says on the 3M tube "24 minutes to dry".
seam sealer is never supposed to be completely rock hard. its supposed to stay somewhat pliable. you wont have a problem with it if you dont use it to fill huge rust holes!! its just designed for small cracks and seams. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.