Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2001, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 10 Jan 2001 10:33:29 -0500
Reply-To:     Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jay L Snyder <Jay.L.Snyder@USA.DUPONT.COM>
Subject:      Sloppy Shifter
Content-type: text/plain; charset=us-ascii

I had a sloppy shifter problem with my '86. There are (4) 10mm nuts that hold the shifter base to the body. These slowly worked themselves loose until the shift lever would move around so much you couldn't find anything. Eventually, the van was stuck in second gear. I was able to drive it home that way. I replaced the four nuts and all was well. See if you have any up and down slop in the shifter. If so, drop the spare and check those nuts! It cost me less than a dollar to pick up new nuts and lock washers. Jay


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.