Re: fuel pressure gauge At 11:27 PM 1/19/2001, Bill Davidson wrote: >any recommendations on where and what type fuel pressure gauge to buy for >using at the pressure check T on my 90 westy syncro? > >Thanks, >Bill You need a gauge that measures up to about 50 psi -- whatever's lying around ought to do. --------------------------------- If you live in Canada, Princess Auto has suitable gauges for $4 - $8. Make an adapter by finding a small bolt the same size thread as the fuel pressure test point. Cut the bolt shorter, drill a hole down the center of the bolt. Solder, braze, weld the small bolt to the gauge. Its not high pressure so you don't have to do a very good job of it. Took me 5 minutes and cost $5 total. Gary Lee |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.