Bill, I had a bunch of "VW 1318" fuel gauges made up and I have the adapters for the Vanagon which will also work for any fuel rail FI system that VW has (Digijet, Digifant I + II and Motronic). These gauges go to 11BAR (160PSI) and have 300PSI hoses which are better specs than the original part that VW supplies. Cost for the gauge is $50 USD and the Vanagon adapter is $15 USD - for list members I will throw in the adapter. Shipping to the USA is a whole $7 USD if you use the post office.
David Marshall Fast Forward Autobahn Sport Tuning 4356 Quesnel Hixon Road Quesnel BC Canada V2J 6Z3 mailto:info@fastforward.ca http://www.fastforward.ca Phone: (250) 992 7775 FAX: (250) 992 1160 • Vanagon Accessories and Engine Conversions • Transporter, Unimog and Iltis Sales • European Lighting for most Audi and Volkswagen models
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Bill Davidson Sent: January 19, 2001 8:27 PM To: vanagon@GERRY.VANAGON.COM Subject: fuel pressure gauge
any recommendations on where and what type fuel pressure gauge to buy for using at the pressure check T on my 90 westy syncro? Thanks, Bill |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.